How to input a specific radius of a circle?

here is syntax to generate a circle but I am not sure what radius it has.

START(0.5,0.27)

ARC(CENTER=0.5,0.18) ANGLE=360

4 posts • Page **1** of **1**

How to input a specific radius of a circle?

here is syntax to generate a circle but I am not sure what radius it has.

START(0.5,0.27)

ARC(CENTER=0.5,0.18) ANGLE=360

here is syntax to generate a circle but I am not sure what radius it has.

START(0.5,0.27)

ARC(CENTER=0.5,0.18) ANGLE=360

- zhkhan
**Posts:**30**Joined:**Sat Feb 07, 2015 1:02 am

See ARC in the Help index. An ARC can be specified in several ways :

ARC TO (x1,y1) to (x2,y2)

ARC ( RADIUS = R ) to (x,y)

ARC ( CENTER = x1,y1 ) to (x2,y2)

ARC ( CENTER = x1,y1 ) ANGLE=angle

ARC TO (x1,y1) to (x2,y2)

ARC ( RADIUS = R ) to (x,y)

ARC ( CENTER = x1,y1 ) to (x2,y2)

ARC ( CENTER = x1,y1 ) ANGLE=angle

- moderator
**Posts:**862**Joined:**Tue Jan 11, 2011 1:45 pm

Can I say that radius is 0.02 in this case?

START(0.5,0.22)

ARC(CENTER=0.5,0.2) ANGLE=360

START(0.5,0.22)

ARC(CENTER=0.5,0.2) ANGLE=360

- zhkhan
**Posts:**30**Joined:**Sat Feb 07, 2015 1:02 am

4 posts • Page **1** of **1**

Users browsing this forum: No registered users and 4 guests